New Process Fibre Company, Inc.
12655 North First Street
P.O. Box 2009
Greenwood, DE 19950
Toll Free: 800-497-4520 • Fax: 302-349-5730
Email: sales@newprocess.com • Website: www.newprocess.com
Print Back

Nylon MDS Flat Washers use a nylon material filled with Molybdenum Disulfide, (MDS) and is highly resistant to wear, possesses high mechanical strength, yields very good electrical properties and is an excellent choice for load applications were moving parts is apparent. Nylon MDS is also self-lubricating. Used optimally for component and fastener applications such as Nylon MDS Flat Washers, and Nylon MDS Gaskets. We are trusted source for nylon washers.  


All Washers are available in English and Metric Units.

Some of the performance characteristics of Nylon MDS Flat Washers are listed below.

  • Low Coefficient of Friction
  • Excellent Dielectric Properties
  • High Mechanical Strength
  • Resistant to Wear
  • Available in a Dark Gray to Black color
  • Our own tooling department creates both hard tooling and steel rule prototyping dies. In addition, a library of over 8,000 existing compound washer dies are ready for use with no extra tooling charges.
  • Nylon MDS Flat Washers can be stamped from 0.010” to 0.125” thicknesses.
  • High volume punch press capacity is assured by an inventory of 75 presses, with cost-efficient small units and high volume equipment capable of 400 strokes per minute.


Email us your part drawing(s) by clicking the "REQUEST INFORMATION" tab above and complete our on-line form and we will provide you with a detailed quotation.

Nylon MDS Washers (Molybdenum Disufide/MoS2)
Unit of Measure
Items Molybdenum Disulfide (MDS or MoS<sub>2</sub>)
WAT670
Molybdenum Disulfide (MDS or MoS2) Washer 		Molybdenum Disulfide (MDS or MoS<sub>2</sub>)
WAT671
Molybdenum Disulfide (MDS or MoS2) Washer 		Nylon MDS Washers (Molybdenum Disufide/MoS2)
WAT11492
Nylon MDS Washers (Molybdenum Disufide/MoS2) 		Nylon MDS Washers (Molybdenum Disufide/MoS2)
WAT11516
Nylon MDS Washers (Molybdenum Disufide/MoS2) 		Nylon MDS Washers (Molybdenum Disufide/MoS2)
WAT11545
Nylon MDS Washers (Molybdenum Disufide/MoS2)
Outer Diameter N/A 1.575 Inch N/A 1.575 Inch N/A 1.000 in N/A 0.544 in N/A 1.312 in
Outer Diameter Tolerance N/A ± 0.010 Inch N/A ± 0.010 Inch N/A ± 0.010 in N/A ± 0.010 in N/A ± 0.015 in
Inner Diameter N/A 0.340 Inch N/A 0.450 Inch N/A 0.375 in N/A 0.277 in N/A 0.656 in
Inner Diameter Tolerance N/A ± 0.015 Inch N/A ± 0.015 Inch N/A ± 0.010 in N/A ± 0.010 in N/A ± 0.015 in
Thickness N/A 0.04 Inch N/A 0.04 Inch N/A 0.125 in N/A 0.062 in N/A 0.089 in0.099 in
Thickness Tolerance N/A ± 0.010 Inch N/A ± 0.010 Inch N/A ± 0.005 in N/A ± 0.003 in N/A
Color N/A N/A N/A Dark Gray N/A Dark Gray N/A
Material N/A Molybdenum Disulfide (MDS) N/A Molybdenum Disulfide (MDS) N/A Nylon N/A Nylon N/A Nylon
Thickness N/A 0.040 Inch N/A 0.040 Inch N/A N/A N/A