Exit
New Process Fibre, an ISO 9001:2008 registered manufacturer, possesses in-house capabilities to extrude High Density and Low Density Polyethylene, Polypropylene Co-polymer or Homo-polymer, Acetal Co-polymer or Homo-polymer and Nylon 6, Nylon 6/6, or Nylon MDS into sheets, strips, rolls, and coils.
  • Available thicknesses range from 0.005" to 0.250" in standard and custom colors
  • Available widths up to 38" untrimmed or slit to width as low as 0.500"
  • Offer standard 3" and 8" paper cores and 10" & 16" without paper cores
  • Offer quantities ranging between 300 lbs (minimum) to full truck-load quantities

A large array of colors and/or color matching are available on certain materials. Minimum quantities may apply. 


Request a Quote (red button above) for your next sheet, roll, or coil project and we will provide you with a detailed quotation!

Unit of Measure

Material Thickness

N/A

  • High Density Polyethylene (HDPE) = 0.010” to 0.250”
  • Low Density Polyethylene (LDPE) = 0.015” to 0.250”
  • Polypropylene & Flame Retardant Polypropylene - Formex® = 0.005” to 0.187”
  • Nylon 6 & Nylon 6 MDS filled = 0.040” to 0.125”
  • Nylon 6/6 & Nylon 6/6 MDS filled = 0.010” to 0.062”
  • Acetal Copolymer = 0.010” to 0.093”

Tolerances

N/A

  • Material Thickness 0.005” to 0.046” with +/- 0.002” tolerance
  • Material Thickness 0.047” to 0.093” with +/- 0.003” tolerance
  • Material Thickness 0.094” to 0.125” with +/- 0.005” tolerance
  • Material Thickness 0.126” to 0.250” with +/- 0.007” tolerance (0.250" for HDPE only)

Materials

N/A

  • High Density Polyethylene
  • Low Density Polyethylene
  • Extruded Polypropylene
  • Flame Retardant Polypropylene
  • Nylon 6, 6/6, MDS
  • Acetal Copolymer

Part Dimensions

N/A

  • Core diameter - 8” standard
  • Other sizes are 3” & 6” with paper coils and 10” & 16” without paper core
  • Slit width - Coil stock minimum is 0.500” +/- 0.015” for thicknesses up to 0.031”
  • For thicknesses over 0.031” the minimum slit width is 0.875” +/- 0.015”
  • Sheets - Available 0.030” up to 0.187” thick
  • Sheet lengths up to 10 ft. Max.
  • Sheet length tolerance: +/- 1”
  • Sheet width tolerances will be as per the chart