Click here to submit a custom washer request. We can fabricate nearly all washer dimensions.

Kapton is a polyimide film, manufactured by DuPont Electronics is an excellent choice for Kapton Flat Washers in applications requiring a tough, chemically resistant material.  Used as Kapton Washers, they also exhibit superior electrical properties. It is a very stable material over wide temperature range from minus 273 to plus 400 degrees centigrade, (-459 to 752 degrees F).

Washers made with this material can be used in aircraft, x-ray and 3D printing applications to name just a few.

  • Typical properties* @23C
    • 231 Mpa - Ultimate Tensile Strength
    • 72% - Ultimate Elongation
    • 1.42 g/cc - Density
    • 2.5 GPa - Tensile Modulus
  • Typical properties* @200C
    • 139 Mpa - Ultimate Tensile Strength
    • 83% - Ultimate Elongation
    • 1.42 g/cc - Density
    • 2.0 Gpa - Tensile Modulus

* Information courtesy of DuPont Electronics. Kapton is a registered trademark of E.I.DuPont

Email us your part drawing(s) by clicking the "REQUEST INFORMATION" tab above and complete our on-line form and we will provide you with a detailed quotation.

    26 - 29 of 29 | Results Per Page | View |
    1 2 
    Clear Filter

    Material

    Outer Diameter (Inch)

    Inner Diameter (Inch)

    Thickness (Inch)

    Item #

    Material

    Outer Diameter

    Inner Diameter

    Thickness

    WAO141 N/A Kapton N/A 0.625 Inch N/A 0.445 Inch N/A 0.005 Inch
    WAO124 N/A Kapton N/A 0.705 Inch0.720 Inch N/A 0.190 Inch0.200 Inch N/A 0.002 Inch
    WAO424 N/A Kapton N/A 0.8 Inch1.000 Inch N/A 0.250 Inch N/A 0.005 Inch
    WAT9584 N/A Kapton N/A 1.125 Inch N/A 0.125 Inch N/A 0.005 Inch
    26 - 29 of 29 | Results Per Page | View |
    1 2